MIMAKI SINGAPORE PTE. LTD.

"Reset a switch" is displayed.

  • Ensure that the maintenance cover and front cover are closed, the emergency stop switch is not pressed, and there is no interference with the media on the front acrylic panel.

Check the status of the total of six sensors listed below.

Confirm that the front covers on the left and right sides of the main unit are closed.
Confirm that the maintenance cover located in the lower part of the main unit is closed.



 
If the emergency switch on the right side of the table and the upper left part of the machine is pressed, release it.
* Pull the emergency switch upward (or rotate it clockwise) to release it.



Return to Content

PAGETOP